SPRING SMASHER - AUTOMATED TOUCH SCREEN MODEL
* Can be programmed to pull up to 3,000# to rate pull bars, droop limiters, etc.
* Up to 20 owner programmed preset tests used to do automated testing.
* Choose the data points you want to save every .125, .250, or .500 of an inch.
* Displays 4 measurement outputs: center-to-center, travel distance, total load, & offset load.
* Saves up to 200 test result files.
* Graph screen allows overlay of up to 4 tests.
* Capable of transferring data to Excel to store and graph on your computer.
* May still be used as a manual tester and optional coil over spring loader is available.
* Accurately rate your coil over springs.
* Set springs up off race car once obtaining center-to-center measurement of shock mounts.
* Use machine to analyze bump stops and double stack springs.
* 3500# capacity.
* 115 volt power supply.
* Electric actuator with brake provides more stable reading than air or hydraulic models.
* Dimensions are 15” x 15” x 72” Tall
* Click here for our Automated Touch Screen Spring Smasher Flyer!

Spring Smasher – Automated Touch Screen Model
List Price - $6,895.00
Racer Price - $6,295.00


Click to View Demo and Instructions

SPRING SMASHER - STANDARD MODEL
* Limit cut-out switch can be installed to rate pull bars, droop limiters, etc.
* Accurately rate your coil over springs.
* Set springs up off race car once obtaining center-to-center measurement of shock mounts.
* Use machine to analyze bump stops and double stack springs.
* Display shows 4 outputs total - 2 distance outputs (center-to-center of mounts & distance traveled) - 2 load outputs (actual weight load 3,000# max & zeroed weight load).
* 115 volt power supply.
* Electric actuator with brake provides more stable reading than air or hydraulic models.
* Dimensions are 15” x 15” x 72” Tall
* Click here for our complete Spring Smasher Instruction Manual!
* Click here for our Standard Model Spring Smasher Flyer!

Spring Smasher – Standard Model
List Price - $3,495.00
Racer Price - $3,295.00


Click to View Demo

SPRING SMASHER - USB MODEL
* Our popular Spring Smasher is now also available as a USB Model. You get all of the great features of our standard model plus USB capabilities provide you with the following:
* Capture data points & write to USB flash drive
* Uses Excel on your computer to make graphs & keep track of your tests
* Works with Windows Operating System, Windows 98 & newer, Excel 07 & newer, Not MAC compatible!
* Dimensions are 15” x 15” x 72” Tall
* Click here for our USB Model Spring Smasher Flyer!

Spring Smasher – USB Model
List Price - $4,495.00
Racer Price - $4,095.00


Click to View Demo

Click to View Instruction Video

GEN II SPRING LOADER
* An option for our Spring Smasher (shown above) is our "Gen II Spring Loader," which has a racer price of $295.00. Give us a call for information on our "Gen II Spring Loader!"

 

 

 

 

 

ORIGINAL SPRING LOADER
* An option for our Spring Smasher (shown above) is our "Original Spring Loader," which has a racer price of $239.00. Give us a call for information on our "Original Spring Loader!"


Click to View Demo

 

 

TORSION BAR DYNO
* Easy to use, accurate and reliable best describes the Accu-Force Torsion Bar Dyno
* Dyno Displays Both Compression & Rebound Readings
* Up to 50 Owner Programmed Preset Tests Used to do Automated Testing
* Travel is Owner Programmable - Up to 10”
* Choose the Data Points You Want to Save Every .125, .250 or .500 of an Inch
* Graph Screen Allows Overlay of up to 4 Tests
* May Also be Used in Manual Test Mode Easy To Use Touch Screen
* Saves up to 200 Test Result Files
* Also Capable of Transferring Data to Excel to Store & Graph on Your Computer
* Test 18” Through 31” Torsion Bars
* Test 3/4”, 7/8”, 1” and 1 1/8” Diameter Bars
* Comes Standard with 1 1/8” x 15” Arm for Testing (Additional Arm Kits Available)
* 115 Volt Power Supply
* Click here for our Torsion Bar Dyno Flyer!

Torsion Bar Dyno - 115 Volt
Racer Price - $6,295.00
Additional Arm Kits Racer Price - $219.95 each

SHOCK DYNOS
* Easy to use, accurate, and reliable best describe our Accu·Force Shock Dynos - available in two models to suit your needs.
* 115 volt power supply for standard 650# Shock Dyno.
* 230 volt power supply for hi-torque 1,500# Shock Dyno.
* 0"-12.5" per second variable velocity.
* Dimensions are 23" wide x 18" deep x 54" tall.
* Plots as many speeds as desired per shock on a single graph.
* Gas shocks can be read with gas force removed from graph.
* Click here for our complete Shock Dyno Instruction Manual!

Standard Shock Dyno - 650# - 115 Volt
List Price - $4,895.00
Racer Price - $4,495.00

Hi-Torque Shock Dyno - 1,500# - 230 Volt
List Price - $6,295.00
Racer Price - $5,895.00


Click to View Demo

GAS SHOCK FILL MACHINE
* Easy to use and reliable best describes the Accu·Force Gas Shock Fill Machine.
* Eliminates the need to install Schrader valves in gas shocks.
* Designed to take apart & reassemble non take apart shocks.
>>> Bilstein 36 mm SG and 46mm SZ shocks
>>> FOX Evolution shocks
>>> May also be used for other applications
* Pump and filter assembly included to drain shock assembly.
* 115 volt power supply.

Gas Shock Fill Machine - 115 Volt
Racer Price - $3,295.00


Click to View Demo

 

ACCU·FORCE SPRING SMASHER is a registered trademark of Accu-Force Shock Dynos, Ltd.

 

..:: home | equipment | data acquisition | shock service | seminar | customers | shop tour | contact ::..

HomeEquipmentShock ServiceSeminarCustomersShop TourContactData Acquisition Follow Us on Twitter! Find Us on Facebook! Email Keith Berner! Delph Communications